{"id":419,"date":"2015-10-24T03:57:45","date_gmt":"2015-10-24T03:57:45","guid":{"rendered":"http:\/\/www.china-flow-meters.com\/?page_id=419"},"modified":"2016-08-05T03:53:06","modified_gmt":"2016-08-05T03:53:06","slug":"mass-flow-controller-instruments-mass-flowmeter","status":"publish","type":"page","link":"http:\/\/www.china-flow-meters.com\/product\/flowmeters\/mass-flowmeter\/mass-flow-controller-instruments-mass-flowmeter\/","title":{"rendered":"Mass Flow controller Instruments Mass Flowmeter"},"content":{"rendered":"

\"Mass<\/p>\n

Mass Flow controller Instruments Mass Flowmeter<\/span><\/h2>\n

The Coriolis mass flowmeter Mass Flow controller Instruments Mass Flowmeter can measure the mass flow rate directly, and won\u2019t be affected by the measured medium temperature, pressure, density, viscosity.<\/p>\n

Inquiry now <\/a><\/p>\n

 <\/p>\n

 <\/p>\n

Product Details<\/strong><\/span><\/p>\n

Basic Info.<\/strong><\/span><\/p>\n

Accuracy:\u00b10.2%~\u00b10.15%, \u00b10.2-0.5%
\nSize:Dn1.5~Dn200
\nSensor:Tube\/Flange
\nType:Coriolis Mass Flow Meter
\nMeasuring Media:Liquid
\nMeasuring Principle:Atomic Physics
\nFlow Fluid Measured:Liquid, Air, Solid Flow
\nOutput Signal:4-20mA, Pulse, RS485, Hart
\nIndicate:Flow Rate, Total Flow, Density, Temperature
\nFluid Types:Two-Phase Flow, Three-Phase Flow
\nExport Markets:Global
\nAdditional Info.<\/span><\/p>\n

Trademark:U-ideal
\nPacking:Wooden Case or Carton
\nOrigin:Tianjin, China
\nHS Code:90261000
\nProduction Capacity:6000 PCS\/Month
\nProduct Description<\/p>\n

Mass Flow Meters
\nMass flow+ volume flow+density +temperature measurement+calculated variables (e.g. fluid concentrations)I. Main technical parameters
\n(1) Measurement scope: 2kg\/h~500t\/h
\n(2) Accuracy: \u00b1 0.2%~\u00b1 0.15%
\n(3) Work pressure: (0~32) MPa (in case of other high pressure, it must be of special order)
\n(4) Medium temperature: -50\u00ba C~ +350\u00ba C,
\nMeasurement accuracy: \u00b1 1\u00ba C
\n(5) Environment temperature: -20\u00ba C ~ +70\u00ba C
\n(6) Measurement medium: Liquid, gas, solid, or two phases and three phases mixed fluid
\n(7) Output signal:
\n4-20mA current signal of flow, with load resistance \u2264 500\u03a9
\n0-10kHz frequency signal of flow.
\nRS485 Communication protocol
\nHart protocol
\n(8) Power supply voltage: 24VDC
\n(9) Measurement of measuring pipe: 316L stainless steel
\n(10) Response time: 0.1s~5s, adjustable
\n(11) Explosion-proof grade: Ex(ib)II BT2-T5
\nMass flow sensor<\/p>\n

Composite type mass flowmeter- all – in- one type<\/p>\n

Structure:<\/p>\n

Every meter consists of two parts: the sensor (primary meter) and the transmitter (secondary meter).
\nThe sensor (primary meter) is machinery part of mass flow meter. There are a vibrator, two displacement sensors and a temperature sensor in it.
\nThe transmitter (secondary meter) is display part of the meter, also is electrical part. There are power supply, analog circuits, digital circuits, displayer, and output circuits and so on in it. Its foundational functions are receiving and regulating the electrical signal from sensors, directly getting mass flow, temperature and density after regulating, and calculating volume flow and other need parameters from known parameters. It can display, output, store and long distance transmit, and you can modify the parameters of flow meter. There is a diode safety barrier in transmitters; the function of the diode safety barrier is safeguard to isolating explosion.
\nAs the composite explosion-proof flow meter, the sensor (primary meter) is essential safety; the transmitter (secondary meter) is explosion isolated. The sensor and the transmitter may all operate under hazardous area.
\nAs the essential safety flow meter, the sensor (primary meter) can operate under hazardous area, the transmitter (secondary meter) must only operate under prescriptive safety area (see section 3.2), forbidden to operate under hazardous area.<\/p>\n

The sensor can be installed vertically or horizontally.<\/p>\n

1.\u00a0\u00a0\u00a0\u00a0 Introduction of Coriolis flow meter<\/span><\/p>\n

The Coriolis force mass flowmeter can measure the mass flow rate directly, and won’t be affected by the measured medium temperature, pressure, density, viscosity.<\/p>\n

High precision of CMF series of Coriolis force mass flowmeter is mainly used to measure the instantaneous mass flow rate and cumulative mass flow, instantaneous volume flow and cumulative volume flow, at the same time also can display the medium temperature, medium density or concentration. It is mainly suitable for the following industries:
\n(1) he Toil industry, such as diesel, gasoline, heavy oil fuel metering; Crude oil output measurement, moisture content, the single well production; Crude oil loading and unloading metering, etc.;
\n(2) The chemical industry, such as toluene, xylene, butanone, cyclohexanone, n-butyl alcohol, isobutyl alcohol, methylene chloride, chloroform, liquid sulfur, lactam etc;
\n(3) The power industry, such as heavy oil, diesel fuel oil metering, slurry density meter limestone-gypsum wet desulphurization;
\n(4) The food, pharmaceutical industries, such as chocolate syrup, milk, fruit juice, pharmaceuticals, BPC (bulk pharmaceutical chemicals) measurement (clamp type healthy connection type);
\n(5) The energy industry, such as liquefied petroleum gas, natural gas, high pressure gas metering;<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Specs<\/th>\nLine Sizes (mm)<\/th>\nFlow Range (t\/h)<\/th>\nCalibration Range (t\/h)<\/th>\nMax. Tube Pressure (MPa)<\/th>\nZero Stability (t\/hr)<\/th>\nVelocity? Parameter<\/th>\n<\/tr>\n<\/thead>\n
DN1<\/td>\n1<\/td>\n0-0.04<\/td>\n0.004~0.04<\/td>\n30<\/td>\n0.000008<\/td>\n353.7<\/td>\n<\/tr>\n
DN3<\/td>\n3<\/td>\n0~0.35<\/td>\n0.035~0.35<\/td>\n30<\/td>\n0.000067<\/td>\n39.3<\/td>\n<\/tr>\n
DN6<\/td>\n6<\/td>\n0~0.7<\/td>\n0.07~0.7<\/td>\n30<\/td>\n0.00016<\/td>\n19.65<\/td>\n<\/tr>\n
DN10<\/td>\n10<\/td>\n0~1.2<\/td>\n0.12~1.2<\/td>\n30<\/td>\n0.0002<\/td>\n4.912<\/td>\n<\/tr>\n
DN15<\/td>\n15<\/td>\n0~6.4<\/td>\n0.64~6.4<\/td>\n4<\/td>\n0.0011<\/td>\n2.183<\/td>\n<\/tr>\n
DN25<\/td>\n25<\/td>\n0~16<\/td>\n1.6~16<\/td>\n4<\/td>\n0.002<\/td>\n0.902<\/td>\n<\/tr>\n
DN40<\/td>\n40<\/td>\n0~40<\/td>\n4~40<\/td>\n4<\/td>\n0.003<\/td>\n0.334<\/td>\n<\/tr>\n
DN50<\/td>\n50<\/td>\n0~65<\/td>\n6.5~65<\/td>\n4<\/td>\n0.006<\/td>\n0.197<\/td>\n<\/tr>\n
DN80<\/td>\n80<\/td>\n0~160<\/td>\n16~160<\/td>\n2.5<\/td>\n0.01<\/td>\n0.0873<\/td>\n<\/tr>\n
DN100<\/td>\n100<\/td>\n0~250<\/td>\n25~250<\/td>\n2.5<\/td>\n0.015<\/td>\n0.0544<\/td>\n<\/tr>\n
DN150<\/td>\n150<\/td>\n0~550<\/td>\n55~550<\/td>\n2.5<\/td>\n0.03<\/td>\n0.0239<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

Mass Flow controller Instruments Mass Flowmeter The Cor […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":379,"menu_order":0,"comment_status":"open","ping_status":"closed","template":"page-template-left-sidebar.php","meta":{"footnotes":""},"_links":{"self":[{"href":"http:\/\/www.china-flow-meters.com\/wp-json\/wp\/v2\/pages\/419"}],"collection":[{"href":"http:\/\/www.china-flow-meters.com\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.china-flow-meters.com\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.china-flow-meters.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.china-flow-meters.com\/wp-json\/wp\/v2\/comments?post=419"}],"version-history":[{"count":0,"href":"http:\/\/www.china-flow-meters.com\/wp-json\/wp\/v2\/pages\/419\/revisions"}],"up":[{"embeddable":true,"href":"http:\/\/www.china-flow-meters.com\/wp-json\/wp\/v2\/pages\/379"}],"wp:attachment":[{"href":"http:\/\/www.china-flow-meters.com\/wp-json\/wp\/v2\/media?parent=419"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}